FP-2423-7 BENT TIP

FP-2423-7 BENT TIP

Part #: 167-5055

Request 3D Model

Request 3D Model


Standard Single Bend tips are an economic solution to weld in a tight area or hard to reach area such as a flange or corner.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 2.188 IN
  • The outside diameter is 0.500 IN
  • The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
  • The weld face is 0.188 IN
  • The offset is 0.438 IN
  • The engagement angle is 42 Degrees

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Taper 4RW
Nose Type A
Overall Length 2.18750
Outer Diameter 0.50000
Welding Face Dia. 0.188
Offset 0.4375
Inner Diameter 0.50000
Unit of Measure IN
Bend Angle (Deg) 42.0

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov