FA-15214-20 BENT TIP
Part #: 165-1460
Request 3D Model
Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.
RMWA Class 1 (C15000) material - a copper zirconium material recommended for spot welding coated materials and highly conductive materials such as aluminum, magnesium alloys, brass and bronze.
- The overall length is 2.88 IN
- The outside diameter is 0.625 IN
- The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
- The weld face is 0.25 IN
- The offset is 1.25 IN
See ways to use this part
Click the video title to watch on YouTube
Specifications
| RWMA Material Type | RWMA Class 1 - C15000 |
|---|---|
| RWMA Taper | 5RW |
| Nose Type | A |
| Overall Length | 2.87500 |
| Outer Diameter | 0.62500 |
| Welding Face Dia. | 0.25 |
| Offset | 1.2500 |
| Water Hole Dia. | 0.28125 |
| Taper to Bend Length | 0.7500 |
| Bend to Nose Length | 1.0000 |
| Unit of Measure | IN |
