FA-2436-20 BENT TIP

Part #: 167-0580

Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

The overall length is 3.38 IN
The outside diameter is 0.500 IN
The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
The weld face is 0.188 IN
The offset is 1.25 IN

See ways to use this part

Click the video title to watch on YouTube

Tuffaloy Double Bend Electrodes in a Channel

Specifications

RWMA Material Type	RWMA Class 2 - C18200
RWMA Taper	4RW
Nose Type	A
Overall Length	3.37500
Outer Diameter	0.50000
Welding Face Dia.	0.188
Offset	1.2500
Water Hole Dia.	0.28125
Taper to Bend Length	1.1250
Bend to Nose Length	1.0000
Unit of Measure	IN