FA-25212-16 BENT TIP

Part #: 167-1400

Standard Double Bend Electrodes are an economic solution to weld in a tight area or hard to reach area such as a flange or corner. This part has water cooling all the way to the nose which may enable them outlast cast or forged tips with a similar geometry.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

The overall length is 2.75 IN
The outside diameter is 0.625 IN
The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
The A nose or Pointed face tip is a general purpose weld face suitable for most spot welding applications.
The weld face is 0.25 IN
The offset is 1.00 IN

See ways to use this part

Click the video title to watch on YouTube

Tuffaloy Double Bend Electrodes in a Channel

Specifications

RWMA Material Type	RWMA Class 2 - C18200
RWMA Taper	5RW
Nose Type	A
Overall Length	2.75000
Outer Diameter	0.62500
Welding Face Dia.	0.25
Offset	1.0000
Water Hole Dia.	0.37500
Taper to Bend Length	0.8750
Bend to Nose Length	1.0000
Unit of Measure	IN