TG-2610 SHANK

Part #: 161-2610

Request 3D Model

Straight shanks for male caps are a cost effective way to utilize caps on any standard rocker arm, press type, robot or bench mounted machine. The shank has a water hole through the entire part to ensure the cap is properly cooled.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

The overall length is 2.50 IN
The outside diameter is 0.750 IN
The part mounts via a 6RW standard taper which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
The part holds a subcomponent via a 6RW cap taper which is suitable for weld forces ranging between 1,500 to 2,000 pounds of force.
The assembled length is 3.50 IN

Specifications

RWMA Material Type	RWMA Class 2 - C18200
RWMA Base Taper	6RW
RWMA Cap Taper	6RW Cap Taper
Overall Length	2.50000
Outer Diameter	0.75000
Inner Diameter	0.43750
Assembled Length	3.5000
Unit of Measure	IN