TG-2706 SHANK

Part #: 161-2706

Request 3D Model

Straight shanks for male caps are a cost effective way to utilize caps on any standard rocker arm, press type, robot or bench mounted machine. The shank has a water hole through the entire part to ensure the cap is properly cooled.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

The overall length is 1.50 IN
The outside diameter is 0.875 IN
The part mounts via a 7RW standard taper which is suitable for weld forces ranging between 2,000 to 2,400 pounds of force.
The part holds a subcomponent via a 7RW cap taper which is suitable for weld forces ranging between 2,000 to 2,400 pounds of force.
The assembled length is 2.50 IN

Specifications

RWMA Material Type	RWMA Class 2 - C18200
RWMA Base Taper	7RW
RWMA Cap Taper	7RW Cap Taper
Overall Length	1.50000
Outer Diameter	0.87500
Inner Diameter	0.50000
Assembled Length	2.5000
Unit of Measure	IN