AD-75-2 ADAPTER
Part #: 190-7520
Request 3D Model
Electrode Adapters are used to improve electrode holder life and flexibility by allowing the adapter to be replaced when the taper wears out.
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The overall length is 2.000 IN
- The hex width is 1.000 IN
- The part mounts via a 7RW standard taper which is suitable for weld forces ranging between 2,000 to 2,400 pounds of force.
- The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The body length is 0.750 IN
Specifications
| RWMA Material Type | RWMA Class 2 |
|---|---|
| Pipe Thread or Taper | 7RW |
| Taper Socket | 5RW |
| Overall Length | 2.00000 |
| Hex Body Size | 1.00000 |
| Body Length | 0.7500 |
| Unit of Measure | IN |
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov
