AD-584-90 ADAPTER

AD-584-90 ADAPTER

Part #: 190-8490

Request 3D Model

Request 3D Model


Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

  • The overall length is 1.625 IN
  • The part width is 1.000 IN
  • The part mounts via 5/8 - 14 NPT threads.
  • The part holds a subcomponent via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The body length is 1.000 IN
  • The offset is 1.500 IN
  • The engagement angle is 90 Degrees

Specifications

RWMA Material Type RWMA Class 2
Pipe Thread or Taper 5/8 - 14 NPT
Taper Socket 4RW
Overall Length 1.62500
Offset 1.5000
Body Length 1.0000
Width of Body 1.00000
Unit of Measure IN
Angle of Engagement (deg) 90.0
Tube Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov