ON-755-430 OFFSET HOLDER
Part #: 335-1370
Request 3D Model
Standard Offset holders are designed to optimize tool life. The holder comes with a threaded electrode adapter which can be replaced when the taper wears out. These holders are commonly used with Rocker Arm and Pedestal Type welders.
RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.
- The mounting shank length is 3.500 IN
- The mounting shank diameter is 0.75 IN
- The part holds a subcomponent via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
- The offset is 4 IN
- The engagement angle is 30 Degrees
Specifications
| RWMA Material | RWMA Class 2 |
|---|---|
| Shank Diameter | 0.75 |
| Adapter Tip Socket (RWMA Taper) | 5RW |
| Offset | 4.0000 |
| Shank Length | 3.500 |
| Unit of Measure | IN |
| Socket Angle | 30.0 |
Notice for California Residents
WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov
