TP-2414-16 BENT SHANK

TP-2414-16 BENT SHANK

Part #: 164-2490

Request 3D Model

Request 3D Model


Bent Shanks for Female Caps are a cost effective way to utilize caps on any standard rocker arm, press type, robot or bench mounted machine where an offset is required. The shank has a water hole through the entire part to ensure the cap is properly cooled.

RMWA Class 2 (C18200) material - a copper, chromium material recommend for high production operations spot welding hot or cold rolled steels, galvanized and coated materials.

  • The overall length is 3.50 IN
  • The outside diameter is 0.500 IN
  • The part mounts via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The part holds a subcomponent via a 4RW cap taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
  • The assembled length is 4.00 IN
  • The offset is 1.00 IN
  • The part includes a water tube for cooling

Specifications

RWMA Material Type RWMA Class 2 - C18200
RWMA Base Taper 4RW
RWMA Cap Taper 4RW Cap Taper
Overall Length 3.50000
Outer Diameter 0.50000
Offset 1.0000
Inner Diameter 0.28125
Assembled Length 4.0000
Unit of Measure IN
Tube Yes

Notice for California Residents

WARNING: Cancer and Reproductive Harm WARNING: Cancer and Reproductive Harm www.p65warnings.ca.gov